The Foden 6-ton C type
steam estate tractor
PAGE 9
Click on the thumb nails
to get enlarged picture
Some items get designed on a scrap of paper if they are not on the drawings like this blowdown valve.
Note this design does not comply with recommendations to prevent valves from screwing complety out when under pressure. Needs a mod!
The water filter fitted to the water tank. Not exactly as drawn as only one takeoff point for the injector. the water pump source is taken from another tank outlet.
The outlet is also at an angle so it will clear local pipework
>The local pipework
showing filter, injector, water valve for injector and pump bypass valve
connected to the water bypass 'T'
The jig for silver
soldering the injector body parts together.
Making globe valve
bodies
View on the backhead
